Home | Safety | Catalog | Contact Us | Login | Register | My Cart  

Air Nailers  |  Collated Nails Staplers  Staples  |  Hog Ring Tools  Collated Hog Rings  |  Bostitch Parts Kits

For Individual Bostitch Parts  

 

 

Air Coil Roofing Nailers - Pneumatic Coil Roofing Nails

 

Air nails - 15 degree coil nails for Atro, Bostitch, DeWalt or Duo Fast. Buy plastic collated or  wire collated coil nails for Hitachi, Max, Makita, Paslode or Senco air nailers - insulation nailers - roofing nailers - siding nailers at fasten8.com!

  • RN46B-1 Contact Trip
  • RN46B-2 Sequential Trip

RN46B Specifications:

  • Driving Power:410 inch lbs
  • Fastener Range:3/4" to 1-3/4"
  • Magazine Capacity:120
  • Operating Pressure:70-120 psi
  • Power to Weight Ratio:83.6
  • Thread Fitting Type:NPT
  • Thread Size:1/4"
  • Tool Height:10-5/8",269.88mm
  • Tool Length:10-1/2",266.7mm
  • Tool Width:4-5/8",117.48mm
  • Tool Weight:4.8 lbs, 2.18 kilos

 

Buy air nailers and air nails at MAC Fastening Corp. online. 15 degree coil roofing nailers and coil roofing nails are here.

Applications Include: Composition Roofing, Vapor Barrier Installation, Insulation Board (Adapter Available) - DC6, Vinyl Siding (Adapter Available) - VSA2, Fiber Cement Siding
Coil Roofing Nails Below Fit the Following Air Nailers:  Atro: CN134, Roofing Roll, Craftsman: 18324, 154500, Hitachi: NV 45AB, Jamerco: JTCN-45R, Makita: AN 451, Max: CN12R, CN450R, Paslode: 3175RCU, Porter Cable: RN175, Senco: SCN 200R, SCN 40RN, StanTech: SDCN 10
Features & Benefits:
  • Lightweight magnesium housing for jobsite durability
  • Weighs only 4.8 lbs
  • Dry-fire lockout; does not fire when empty
  • Carbide inserts in tip for long life
  • Over molded grip for comfortable use
  • Quick-set adjustable depth control for consistent nail drives
  • Aggressive wear guards and skid resistant pads
  • 410 inch pounds of driving energy for the hardest of applications
  • Patented single action side load canister
  • Shingle guide with push button adjustments - no tools needed
  • Full round driver for more consistent drive quality

Uses CR Series 15° Wire Collated Coil Roofing Nail .120 Shank. Available in: Galvanized, Stainless Steel

 

Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual.  Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings.  Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important.  Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Evaluate your application to determine the best trigger.  See Safety Information for Trip Operation!
 

 

Coil Roofing Nailers - Coil Roofing Nails

Coil Roofing Nails Below Fit the Following Air Nailers:  

Atro: CN134, Roofing Roll, Craftsman: 18324, 154500, Hitachi: NV 45AB, Jamerco: JTCN-45R, Makita: AN 451, Max: CN12R, CN450R, Paslode: 3175RCU, Porter Cable: RN175, Senco: SCN 200R, SCN 40RN, StanTech: SDCN 10

 

 

Call to order - (800) 841-8569

Air Tools - Air Nailers - Coil Roofing Nailers for Roofing  Materials

 
Item Number Pneumatic Coil Roofing Nailers &  Tool Accessories Description Magazine Capacity Weight/ Tool  
RN46B-1 Roofing Nailer Contact Trip, 3/4" - 1 3/4"

120

6.0  
RN46B-2 Roofing Nailer Sequential, 3/4" - 1 3/4" 120 6.0  
VSA2 Vinal Siding Adapter for RN46B N/A 0.15  

Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual.  Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings.  Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important.  Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Evaluate your application to determine the best trigger.  See Safety Information for Trip Operation!

 

 

Call to order - (800) 841-8569

Coil Roofing Nails for Roofing - Fit 15 Degree Roofing Air Nailers

 
Item Number Length

Points

Finish Shank Type Coil Drywall Nails Fit: Qty / Box Weight / Box (lbs) Boxes / Pallet  
CR19GAL
3/4
Diamond Galvanized Smooth N12,RN45B, RN46B 7200 20.65 64  
CR2DCGAL
7/8
Diamond Galvanized Smooth N12,RN45B, RN46B 7200 26.90 56  
CR2DCSS
7/8
Diamond Stainless Smooth N12,RN45B, RN46B 7200 26.90 56  
CR2DGAL
1
Diamond Galvanized Smooth N12,RN45B, RN46B 7200 26.90 56  
CR3DGAL
1-1/4
Diamond Galvanized Smooth N12,RN45B, RN46B 7200 34.60 48  
CR3DSS
1-1/4
Diamond Stainless Smooth N12,RN45B, RN46B 7200 34.60 48  
CR4DGAL
1-1/2
Diamond Galvanized Smooth N12,RN45B, RN46B 7200 38.65 40  
CR4DSS
1-1/2
Diamond Stainless Smooth N12,RN45B, RN46B 7200 38.65 40  
CR5DGAL
1-3/4
Diamond Galvanized Smooth N12,RN45B, RN46B 7200 44.90 32  

 

Coil Roofing Nails Above Fit the Following Nailers: Atro: CN134, Roofing Roll, Craftsman: 18324, 154500, Hitachi: NV 45AB, Jamerco: JTCN-45R, Makita: AN 451, Max: CN12R, CN450R, Paslode: 3175RCU, Porter Cable: RN175, Senco: SCN 200R, SCN 40RN, StanTech: SDCN 10

 

Information Regarding Corrosion - Zinc coatings on nails and staples can help with corrosion.  However, high humidity, salt air, acidic wood, industrial gases, installation impact, preservatives and fire retardants containing salts, can break down the Zinc coating and cause fasteners to rust.  Harsh conditions may call for special material coating or special fasteners such as aluminum or stainless steel.  Wood manufacturers may call for special or high grade galvanized fasteners which if not used void their product warrantees.  Always check the wood manufacturers' specifications beforehand to insure full compliance with their requirements.

 

   
  Case Quantities, Box Quantities, Roll Quantities, Descriptions, Weights & Pricing are subject to change without notice.  It is our policy to make every effort to notify customers of such changes prior to shipping.  Our pricing is from time of shipment.  Any returns must be received at our warehouse within three weeks after fasten8.com™/usfasten.com™ has shipped your order from our warehouse.  To return product, you must contact us to receive a Return of Goods Authorization Number.  All returns are subject to a 25% restocking charge.  Custom orders are non-returnable.  For problems regarding this web site: contact us.  Copyright © 2016 fasten8.com™/usfasten.com™. All rights reserved.